Help Guide
Interchangeable Lens Digital Camera
ZV-E1
Image Jump Method
Sets the method for jumping between images during playback by operating a dial.
Menu item details
One by one - By 100 images:
Jumps in units of the specified number of images.
By 3 minutes / By 5 minutes / By 10 minutes / By 30 minutes / By 1 hour / By 3 hours / By 6 hours / By 12 hours /
By 24 hours:
Jumps between images by the specified time unit based on the shooting date and time of the images.
Protect Only:
Plays back only protected images.
Rating Only:
Plays back all rated images.
Rating Only (
) - Rating Only ( ):
Plays back only images for which a rating (
to ) has been specified.
W/O Rating Only:
Plays back only images that are not rated.
Shot Mark Only :
Sets the image jump target only to images with Shot Marks.
Shot Mark1 Only / Shot Mark2 Only:
Sets the image jump target only to images with the specified Shot Mark.
No Shot Mark:
Sets the image jump target only to images without Shot Marks.
Divider Frame Only:
Sets the image jump target only to divider frames.
Image After Divider:
Sets the image jump target only to images next to divider frames.
To add a Shot Mark to a movie
If you add a Shot Mark while recording a movie, you can use it as a mark for selecting, transferring, or editing the movie.
Assign [Add Shot Mark1] / [Add Shot Mark2] to the desired key using [
Custom Key/Dial Set.] and press the custom
key while recording a movie.
You can also add a Shot Mark during movie playback by assigning [Add/Delete Shot Mark1] / [Add/Delete Shot
Mark2] to the desired key with [
Custom Key Setting] and pressing the custom key.
To create a divider frame
By creating a divider frame between sessions of shooting, you can use it as a mark when selecting images.
Assign [Create Divider Frame] to the desired key using [
Custom Key/Dial Set.] in advance and press the custom key
when you want to create a divider frame.
MENU →
(Playback) → [Playback Option] → [Image Jump Method] → desired setting item.
1
To Next Page
Loading...
