Help Guide
Interchangeable Lens Digital Camera
ZV-E10
Smartphone Connect
You can adjust settings related to smartphone connection.
Menu item details
Smartphone Connection:
Sets whether to connect the camera and a smartphone. ([On] / [Off])
Connection:
Displays the QR Code or SSID used to connect the camera to a smartphone.
Cnct. while Power OFF:
Sets whether to accept Bluetooth connections from a smartphone while the camera is turned off. ([On] / [Off])
Remote Shoot Setting:
Configures settings for images saved when performing remote shooting using a smartphone. ([Still Img. Save Dest.] / [
Save Image Size] / [ RAW+J Save Image])
Always Connected:
Sets whether to always connect the camera and a smartphone that has previously been connected. ([On] / [Off])
If this item is set to [On], once you connect the camera to a smartphone, you do not need to perform the connection
procedure on the camera again. If it is set to [Off], connect the camera and the smartphone manually when you want to
connect them.
Note
If [
Always Connected] is set to [On], the power consumption will be greater than when it is set to [Off].
Related Topic
Connecting the camera and a smartphone using the QR Code
Connecting the camera and a smartphone using the SSID and password
Cnct. while Power OFF
Using a smartphone as a remote commander
5-028-017-12(2)
Copyright 2021 Sony Corporation
MENU→
(Network) → [Smartphone Connect] → desired setting.
1
To Next Page
Loading...
