Sophos APX 120 - Wireless Radiation Patterns; 2.4 GHz Band Radiation Patterns; 5 GHz Band Radiation Patterns

6
Reboot with current image and clear configuration
1. Press and hold reset button
2. AP reboots (LED will go off and then switch to green briefly)
3. LED will turn solid red for 5 sec. You can still cancel the configuration clearance process by releasing the
reset button before the LED starts blinking
4. LED will blink red (configuration will be cleared)
5. Release reset button
6. AP reboots with factory default settings
Reset
Button
Status
LED
Released
Pressed
Solid Solid Blinking
Reboot
5 Sec
Reboot clear config
Off
6. Support and Documentation
For more information and technical support, please visit www.sophos.com/en-us/support or contact your
local Sophos reseller.
Quick Start Guide APX 120