Sophos XG 330 - User Manual

Operating Instructions
XG 310/330 Rev. 2

Sophos XG 330 Specifications

General

Brand	Sophos
Model	XG 330
Category	Firewall
Language	English

Summary

Security Symbols

Caution and Important Note

Details consequences of not observing notes, including danger and damage.

Operating Elements and Connections

LED Status

Power (LED Display)

Details on power supply and SSD active status LEDs.

LEDs on each RJ45 Ethernet connector

Explanation of ACT/LNK and Speed LEDs for RJ45 ports.

LEDs on each SFP connector

Explanation of ACT/LNK LEDs for SFP ports.

LEDs on each SFP+ connector

LCD Menu Details

System Menu

Network Menu

Firmware Menu

Executable Actions

Factory reset

Resets all settings to factory defaults, retaining firmware version.

Shut down

Safely powers off the appliance by stopping all running services.

Reboot machine

Restarts the appliance by shutting down and then starting up.

Shut Down

Reboot Machine

Putting into Operation

Caution

Risk of explosion if battery is replaced by an incorrect type.

Mounting Instructions

Warnings and Precautions

Rack Precautions

Safety measures for rack installation, stability, and coupling.

General Server Precautions

Safety tips for electrical, placement, and handling of server components.

Rack Mounting Considerations

Rack Mounting Instructions

Important Note

Attach the rack-mount brackets to the appliance.

Choose the rack location.

Slide the appliance into the rack.

Attach the front and rear brackets to the rack with the appropriate screws (not included).

Connection and Configuration

SFP GBIC Ports

SFP:

SFP+:

Caution:

Safety warning for SFP/SFP+ ports using lasers, avoid direct eye contact.

Installing a SFP GBIC module:

Removing a SFP GBIC module:

Serial Console

The required connection settings are:

Specifies serial connection parameters: 38,400 bps, 8 data bits, N parity, 1 stop bit.