Rackmount Kit Mounting Instructions XGS 87(w)/107(w)
Please note
This rackmount kit can only be used with XGS 87(w)/107(w) models.
What is included in the box
United Kingdom and Worldwide Sales
Tel: +44 (0)8447 671131
Email: sales@sophos.com
North American Sales
Toll Free: 1-866-866-2802
Email: nasales@sophos.com
Australia and New Zealand Sales
Tel: +61 2 9409 9100
Email: sales@sophos.com.au
Asia Sales
Tel: +65 62244168
Email: salesasia@sophos.com
© Copyright 2020. Sophos Ltd. All rights reserved. Registered in England and Wales No. 2096520, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, UK
Sophos is the registered trademark of Sophos Ltd. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
20-06-01 (DD)
LEDs
Ports
2a. Front-facing installation
ø3.5
16
2.3
ø6.3
22.2
1.0ø8
ø4
2b. Back-facing installation 4.
3.1. 5a. Rackmount installation
5b. Wall mount installation
5c.
Please Note: In addition to the rack mounting kit contents, you will need a long-handled Phillips-head screwdriver.
1. Remove existing screws
from the chassis
Remove the four screws from each
side of the chassis and keep them in a
safe place.
2. Attach the mounting
brackets to the chassis
Please Note: You can mount the unit
into a rack with either the front (2a)
or with the back (2b) facing forwards
(see below). Secure one mounting
bracket to each side of the appliance
using four of the longer round head
screws supplied.
3. Install the adapter trays
Attach both power adapter trays to
the mounting brackets by using the
screws which you removed from the
chassis in Step 1.
4. Install the power adapter
Place the power adapter(s) on the
tray(s) and secure in position with the
supplied adapter bracket(s) by using
two of the short round head screws
supplied.
5. Install the unit
You can either install the unit into a
rack (5a) or hang it on a wall (5b).
Please use appropriate fittings (not
supplied with this kit) for this purpose.
For wall mount installation, we
recommend using wall plugs and
screws with the dimensions shown
below (5c).
Please Note: To avoid potential injury,
the appliance should not be mounted
higher than 2m above ground.
2 mounting brackets (left, right) 2 power adapter trays 2 adapter brackets
4 round headed
M3x6 Screws
8 round headed
M3x8 Screws
To Next Page
Need help?
General
