INSTRUCTION AND SERVICE PARTS MANUAL - FREEZER CS 800, s/n F0176-00 - ALFRED & CO
1
INDEX
INTRODUCTION A1
DECLARATION OF CONFORMITY CE
1. STANDARD WARRANTY B1
2. IDENTIFICATION OF THE MACHINE C1
3. SAFETY
3.1 General safety information D1
3.2 Safety first D1
3.3 Operating zone D2
3.4 Installation D2
3.5 Safety inspection D2
3.6 General operating safety D2
3.7 Service and maintenance safety D3
3.8 Electrical Hazard D4
3.9 Mechanical Hazard D5
3.10 Thermic hazard D6
3.11 Compressed air hazard D6
3.12 Cleaning hazard D7
3.13 Halocarbon hazard D8
3.14 Ammonia hazard - N.A. D9
3.15 Safety labels D10
4. FORESEEN AND NOT FORESEEN USES OF THE MACHINE E1
5 DESCRIPTION OF THE MACHINE AND SPECIFICATIONS
5.1 Purpose of the machine F1
5.2 Principle of operation F2
5.3 Machine analysis by HACCP 43/93/CEE method F2
5.4 Specifications F2
6. MACHINE NOISE EMISSION G1
7. IMPORTANT CAUTIONS
7.1 Protect chrome cylinder H1
7.2 Avoid freeze-up H1
7.3 Beware of sanitizing solutions H1
7.4 Prevent pump damage H2
7.5 Prevent dasher damage H2
8. INSTALLATION AND ASSEMBLY
8.1. Receiving and inspection I1
8.2. Installation place I1
8.3. Uncrating, installation and levelling I1
8.4. Assembly/disassembly scraper blades I2
9. OPERATION
9.1. Unit preparation L1
9.2. Pre-start-up procedures L1
9.3. Production L2
9.4. Overrun table metric L12
9.5. Operation problem solving L13
10. CLEANING AND SANITIZING
10.1.
First cleaning M1
To Next Page
Loading...