INSTRUCTION AND SERVICE PARTS MANUAL - FREEZER CS 800, s/n F0176-00 - ALFRED & CO
F5
DESCRIPTION OF THE MACCHINE AND SPECIFICATIONS
POWER SOURCES AND UTILITIES REQUIRED
• Electrical power: 3 x 230 V 60 Hz
• Sanitary compressed air: 7 bar
• Cooling water: 20°C (max), 4 bar
• Refrigerant type: R404A
FREEZER FEATURES
The technical and functional features of the machine are shown in the table.1
The maximum capacities listed are based on the following conditions:
• ice cream mix with 10% fat
• 15% sugar (of which 85% is sucrose)
• 0,3 % stabilizer
• 38% total solids
• temperature of entering mix: 4° C
• ice cream drawn at -5° C.
• refrigerant evaporating temperature in the jacket: -33°C
MAIN FREEZER COMPONENTS
• stainless steel 304 frame
• freezing cylinder made of plated chrome--nickel
• freezing vessel-evaporator made of 304 stainless steel
• dasher and machine parts in contact with product made of 316 st. steel
with scraper blades of special sanitary alloy
• rotary pumps, made of 316 st.steel, with rotors of resilient sanitary material
• dasher drive and pump drive, powered by electrical motors
• control and power panel and electrical system according to the directive
72/23/CEE
• self containing freon refrigeration unit, including semi-hermetic compressor
and condenser with pressure controlled water valve.
• compressed air system.
To Next Page
Loading...