INSTRUCTION AND SERVICE PARTS MANUAL - FREEZER CS 800, s/n F0176-00 - ALFRED & CO
D2
device, the proper and safe performance of this equipment depends upon
using sound and prudent operating, maintenance and servicing procedures
under properly trained supervision.
For your protection, and the protection of others, learn and always follow the
safety rules outlined in this booklet.
3.3. OPERATING ZONE
An operating zone should be established around all machines. A brightly
painted guard rail or warning stripe should define the zone. Only the operator
or other authorized personnel should be within the operating zone when
machine control circuits are energized or the machine is running. No tools or
other equipment should be kept within the operating zone.
3.4. INSTALLATION
WARNING !
Power sources, such as electric and air, should be installed by trained
and authorized personnel only.
3.5. SAFETY INSPECTION
Before starting a machine:
• Be absolutely positive all guards and safety devices are installed and
operative.
• Be sure all personnel are clear of the machine.
• Remove (from the operating zone) any materials, tools or other foreign
objects that could cause injury to personnel or damage the machine.
• Make certain the machine is in operating condition.
• Make certain all indicating lights, horns, pressure gauges or other safety
devices or indicators are in working order.
After shutdown:
• Make certain all air and electrical power is turned off.
3.6. GENERAL OPERATING SAFETY
• Do not operate this machine until you read and understand the operating
instructions and become thoroughly familiar with the machine and its
controls.
• Never operate a machine while a safety device or guard is removed or
disconnected.
To Next Page
Loading...