Sorma BSS-134 - Page 11

1

BSS-134
CHAP.- 3
2!! /# 0
They must be suitable for the hand of the operator that must wear them and
must be suffi ciently long to cover the elastic clothing around the wrist of the
operator. They must guarantee a safe and rapid grip as well as guarantee
high resistance to the product to be handled. They must guarantee comfort
and good sweat absorption.
*#"
They are the activities aimed at resetting the functionalities of the machine, even if developed by
external staff, they must wear the indicated I.P.D..
Different actions are involved, therefore the I.P.D. to be used during the maintenance actions are the
following:
*!
The clothing the operators must be provided with must be of resistant materials,
they must also allow perfect mobility during the movements the operator must
perform.
The ends of this clothing must remain well adhered to the body (elastic type)
especially around the ankles, the wrists, the neck and the stomach, in order
to avoid that a loose part of the clothing comes into contact with moving parts,
generating serious dangers.
 **. /##0
They must have antistress anatomical insole for the comfort of feet and the
upper part must be impenetrable. They must fully cover the ankle overlapping
with the trousers. They must also allow a correct perspiration of the same foot.
 *3 /# 0
They must be suitable for the hand of the operator that must wear them and
must be suffi ciently long to cover the elastic clothing around the wrist of the
operator. They must guarantee a safe and rapid grip as well as guarantee high
resistance to the product to be handled. They must also agree protections and
comfort against the low and high temperatures and good sweat absorption.
 *43  /#% 0
They must be of suitable size to the face of the operator who must wear them.
They must have a visual range such to guarantee a good visualisation of the
environment and of the same machine.
 *56" /#0
They must have an excellent resistance to both impacts and contact with the
same product. The harness must be adjustable. The helmet must be provided
with front anti-sweat band and with chinstrap for correct fi xing. The material with
which it is realised must allow resistance to both high and low temperatures.
It must allow the operator to have an excellent comfort to guarantee a correct
and safe development of its own task.