EasyManua.ls Logo

Sorma BSS-134 - General Information and Specifications; Introduction, Manufacturer, and Safety Warnings

Sorma BSS-134
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
GENERAL INFORMATIONS
BSS-134
CHAP.- 1
AUTOMATIC VERT-BAG PACKAGING MACHINE
mod. BSS-134
1.1 Foreword
This manual de nes the purpose for which the machine has been constructed and contains information
on performance, technical characteristics, how to use the machine and effect maintenance so as to
ensure correct, problem-free running.
This manual is addressed to the operators and maintenance operators of the machine as well as the
department manager to whom the machine is entrusted.
This manual constitutes integrating part of the machine, it must be completely read before installing
the machine, therefore kept with care (in a protected place, dry, covered from sun rays) for every
further consultation, necessary before carrying out any operation on the machine.
It is recommended that the user read the manual carefully and observe the described standards and
procedures, as they give important information regarding operative safety and maintenance.
Sorma S.p.A. does not undertake liability for any damages to persons or things occurred due to
negligence when executing that written in this manual.
The machine is shipped to the client prepared for installation, after having overcome the tests envisioned
by the manufacturer, in compliance with the laws in force.
Sorma S.p.A. is not responsible for functioning anomalies or general faults, caused by the unauthorised
use of the machine or by interventions and/or amendments made by foreign persons unauthorised
by the same Sorma S.p.A.
1.2 Manufacturer
SORMA S.P.A.
Via Delle Mele n°65
47522 CESENA (FC) ITALIA
Tel. 0547/418611 Fax. 0547/418612
e-mail: sorma@sormaitalia.com
http:/www.sormagroup.com
1.3 Confi dentialy
The technical information contained in this manual is the property of Sorma S.p.A. and is strictly con-
dential: disclosure or copying (even partial) of such information is therefore forbidden unless written
authorization has been obtained from Sorma S.p.A.. Using the manual for any purpose not strictly
connected to machine installation, operation and maintenance is also forbidden.