14
MACHINE SAFETY
BSS-134
CHAP.- 4
4.3 User obligations
The user of the machine must ensure that:
- the machine is destined only and exclusively for the appropriate and agreed uses in contract.
- the service instructions are fully available to staff in charge and that the latter is correctly
trained with regard to the use of the machine, and that it complies with all safety, accident-
prevention regulations and the specifi cations of the same machine.
- access to the protected functions of the machine by key switches is limited to authorised staff.
4.4 Service staff
The operators are classifi ed as follows:
- GENERAL OPERATOR: staff not specialised, able to run the machine through the use of the controls
on the push button control panel, loading and unloading operations of the materials used for
the production and simple start-up or reset functions of the production following a stand-by.
- MECHANICAL MAINTENANCE OPERATOR: qualifi ed technician able to run the machine in
normal conditions, to work the format change, intervene on mechanical parts to perform
all adjustments, maintenance or necessary repairs.
He is not enabled for interventions on powered electric system.
- ELECTRIC MAINTENANCE OPERATOR: qualifi ed technician able to run the machine in normal
conditions, is in charge of all electric interventions of adjustment, maintenance and repair.
He is the only one enabled to work in the presence of voltage inside the electric
control board and in the connecting box.
- SUPERVISOR: qualifi ed technician for more complex interventions.
- EXTERNAL TECHNICIAN: qualifi ed technician made available by the producer or distributor, able
to intervene for amendments, repairs or replacements.
- TECHNICIAN Sorma S.p.A.: qualifi ed technician made available by Sorma S.p.A. or by its agent
to perform complex operations, installation and start-up.
NEVER remove any plate or sticker. Should these be worn away, ask for new ones.
To Next Page
Loading...