*4
SHIPPING AND LIFTING
BSS-134
CHAP.- 5
- Lifting and moving must be performed by people with the necessary technical skills.
- It is important to have an assistant to make signals while moving the machine in order to install it.
- Avoid any sudden movements which could damage the machine.
The BSS-134 or any parts of the same must be handled only using the most suitable media: self-
moving fork lift truck; bridge crane, having a suitable capacity for the actual weight of the machine.
- There must be nobody near the hanging load, within the working range of the crane, of the fork lift
truck or of any other lifting or transport medium.
5.3 Moving the machine
Move the machine by inserting the forks on the forklift truck at the points specifi ed (see fi g.3 chap.5).
Check beforehand that the forks are at least as long as the machine.
Lift the machine carefully to prevent the clamps of the fork-lift truck and the straps (or lifting hooks, if
using a crane) from damaging the delicate parts of the machine.
B
Fig.3 chap.5
To Next Page
Loading...