25
8 - USB/LINE SWITCH
The USB/LINE switch allows to input audio signals to Stereo 2/USB either through the RCA
connectors (STEREO I/P 2) or the USB Audio connector.
Release (press up) the switch to input signals through the STEREO I/P 2 RCA connectors.
Press down the switch to input signals through the USB Audio connector by using a USB
(A-B) cable.
Note: please disconnect the STEREO I/P 2 connections when USB input is to be used.
1
2
8
4
5
6
7
3
To Next Page
Loading...
