31
SPECIFICATIONS
Noise
Measured RMS, 22Hz to 22kHz Bandwidth
Mic E.I.N @ unity gain, 150W source impedance -129dBu
Mix Output, 24 inputs routed to mix, faders at unity, muted <-80dBu
Mix Output, 24 inputs routed to mix, faders down <-100dBu
Crosstalk (@1kHz, typical)
Fader attenuation >95dB
Aux attenuation >80dB
Pan isolation >75dB
Adjacent channel crosstalk >-80dB
Channel Mute >90dB
Fader cut-off (rel. 0 mark) >90dB
Aux Send pots offness >80dB
Frequency Response
Mic/Line Input to any output, 20Hz-20kHz <1dB
THD + N
Mic sens. -30dBu, +20dBu at all outputs @ 1kHz <0.006%
CMRR
Typical @ max gain @ 1kHz >80dB
Typical @ any gain @ 50Hz >60dB
Input & Output Impedance
Mic Input 1.8kΩ
Line Input 10kΩ
Stereo Input 8.6kΩ
2TK Return 12kΩ
Mix, Aux and Insert Sends 75Ω
Input & Output Levels
Mic Input max. level +22dBu
Line Input max. level +22dBu
Stereo Input max. level +22dBu
2TK Return >30dBu
Headphones (@ 200Ω) 150mW
USB 2.0 (Standard B)
Inputs / Outputs 2-in, 2-out
Bit Depth 16-bit, 24-bit
Sampling rate 44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz
Power Consumption
AC mains supply (internal PSU) 90V-240VAC, 50/60Hz universal input
To Next Page
Loading...
Need help?
General
