SOUNDMASTER DAB85 - Led Light

DAB85 / English Instruction Manual
5
BLUETOOTH
®
If you are using a Bluetooth audio device, make sure the working distance is within 10 meters.
Different environment may have effect on the working distance.
1. Select the mode “Bluetooth” (“Bluetooth Pairing” is shown in the display).
2. Activate the Bluetooth function on your Bluetooth device and select “DAB85”. When the
connection was successful the display show “Bluetooth Connected”.
3. Press the “ “ button to start or pause the playback.
4. Press the “ / “ to skip to the previous or next track.
This unit contains also a hands-free function.
If you have connected a mobile phone by Bluetooth and you get a call, press the “ENTER”
button to pick-up the call.
To hang-up the call, press the “ENTER” button.
To reject the call, press and hold the “ENTER” button during ringing.
AUX
1. Select the mode “AUX” (“AUX” is shown in the display).
2. Connect your external device with an AUX cable with Aux jack at the backside of the unit
(Therefore you have to open the phone compartment door).
3. Start the playback on your external device.
EQUALIZER
Press in on mode the “NAP/EQ” button and select with “ / “ one of the installed sound
settings: Normal, Classic, Pop, Jazz, Rock.
NAP
When stay on standby mode, press “NAP/EQ”, the display show NAP Timer < off>.
Press the button repeatedly to select the desired time 10, 15, 30, 45, 60, 90, 120, off and
press “ENTER” to confirm.
LED LIGHT
Press the “LIGHT/ST” button to switch on or off the LED light.
NOTE: To avoid eye damage you will not see directly into the light while the LED is on.