DAB970 / English Instruction Manual
13
AUX-IN
1. Plug the 3.5mm AUX cable (not included) into the “AUDIO IN” jack at the back side of the
unit.
2. Press the “ “ button repeatedly on the unit or press the “AUDIO” button on the remote
control until “AUX IN” is displayed to select the AUX IN function.
3. Start the playback of your external device.
4. Press the “V +/-“ button on the remote control or rotate the “VOLUME” knob on the unit to
adjust the desired volume.
SOUND QUALITY
Adjust Bass or Treble (My EQ)
1. Press the “USER” button on the remote control.
2. Then press the “Treble +/-“ or “Bass +/-“ buttons on the remote control to increase/
decrease the function.
Preset Equalizer
Press the “EQ” button on the remote control. Select the desired sound characteristics such as
Normal / Classic / Jazz / Pop / Rock /MY EQ with the “ / ” buttons on the remote control and
press the “EQ” button to confirm.
SLEEP TIMER
Activate the Sleep timer
To set the sleep timer press the “SLEEP” button on the remote control repeatedly, it changes
the number of minutes shown on the display in this sequence:
OFF 15 30 45 60 90
Show the remaining sleep time
When the “SLEEP” button on the remote control is pressed once, the remaining sleep time is
displayed. Wait for a second until the display returns to the original display.
Cancel the sleep timer
Press the “SLEEP” button repeatedly on the remote control until “off” is displayed.
ALARM
The clock must be correctly set for the alarm to operate correctly.
1. Press the “TIMER” button to enter the timer function.
2. Select “Alarm 1” or “Alarm 2” with the “ / ” buttons and press “OK”.
3. Select and adjust the following points: Alarm On/Off, Frequency, Date/Time, Source,
Duration, Volume. Enter each point by pressing the “OK” button.
Note: If Digital Radio or FM is selected as the alarm source, the next menu item is the selection
of the desired station.
To Next Page
Loading...
