MCD5600 / English Instruction Manual
5
FM (UKW) RADIO
1. Select FM mode.
2. Press “SCAN” or “ / ” on the remote control to start FM auto-search.
It is also possible to rotate “ENTER/SCROLL/SELECT“ or to us the numeric buttons to
tune the desired radio station. Confirm the setting with the numeric buttons with “ENTER”
3. If you tune to a FM stereo station, the ‘stereo’ will show on the display. If you tune to a
weaker FM station, the reception will automatically switch to mono.
You may press “ENTER” to change Stereo or Mono mode
DAB RADIO
1. Select DAB mode.
2. Press “SCAN” to do a full scan of the available DAB channels.
Rotate the “ENTER/SCROLL/SELECT“ knob to choose the desired DAB station.
3. If you wish to tune the DAB channels manually, press and hold “PLAY/PAUSE ” for 2-3
seconds and the display will show the DAB channels from 5A. Then turn the
“ENTER/SCROLL/SELECT” knob to select your desired DAB channel one by one.
PRESET FUNCTION IN DAB/FM MODE
Preset storing
1. In DAB/FM playing mode, choose the desired radio station. Press and hold “PROGRAM” for
2 seconds, “ Empty P1” will show on the display, rotate “ENTER/SCROLL/SELECT“ to
choose the desired station.
2. Press “ENTER/SCROLL/SELECT“ to confirm and ‘Preset 1 Stored’ will show on the
display.
3. Repeat the above 1 - 2 steps to program 20 desired DAB stations or 20 FM stations.
Preset recall
Press “PRESET/ALBUM -/+” to recall the preset station.
To Next Page
Loading...
