MCD5600 / English Instruction Manual
6
CD - MP3 / USB OPERATION
COMPACT DISC CARE
To remove a disc from its storage case, press
down on the centre of the case and lift the disc
out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped
off the discs recorded surface with a soft cloth.
Unlike conventional records, compact discs
have no grooves to collect dust and microscopic
debris, so gently wiping with a soft cloth should
remove most particles. Wipe in a straight line
from the inside to the outside of the disc. Small
dust particles and light stains will have
absolutely no effect on reproduction quality.
Note: CD or USB mode have the same operating procedures.
Playing CD or USB
1. Press “MODE” to enter the CD or USB mode.
2. CD: Press “ ” to open the CD door. Place a CD with the printed side facing up inside the
tray, then close the CD door by pressing “ ”. The first track will start playback.
USB: Insert carefully USB drive in the USB socket. The first track will start playback.
3. Press “ ” to pause the playback. The track time will start blinking. Press “ ” again to
resume the playback.
4. Press “ ” to stop the playback.
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD / USB MODE
1. During CD/USB playback, press “ ” or “ ” repeatedly will skip to higher or lower tracks.
The disc will begin to play from your selected track.
2. To rapidly search forward or backward within a track and locate a specific passage of it,
press and hold “ ” or “ ”. The player will search forward or backward at a high speed.
Release the button when you hear your desired passage and the playback will resume
normal from that point.
3. To select next folder (Album) press “PRESET/ALBUM +/-” on the remote control.
To Next Page
Loading...
