SOUNDMASTER MCD5600 - Aux in Operation

MCD5600 / English Instruction Manual
7
REPEAT and RANDOM Function
1. Press “P.MODE” (PLAY-MODE), the player will repeat the current playing track; “Rep1” will
show on the screen
2. Press “P.MODE” secondly, the player will repeat the tracks in the playing folder; “RepF” will
show on the screen.
3. Press “P.MODE” thirdly; the player will repeat the tracks in the whole playing USB or CD;
“RepA” will show on the screen.
4. Press “P. MODE” fourthly, the player will enter into the “Random” playing mode; “Rand” will
show on the screen. Press “ ” or “ ” button to choose the playing tracks by random.
Press “P.MODE” again to cancel the RANDOM function and the unit resume to the normal
playing sequence.
NOTE: There is no folder in the disc if no MP3 is detected. During playing a CD-Disc, there has
no FOLDER repeating function
MEMORY FUNCTION IN CD/MP3 MODE
1. In CD/USB stop mode, press “PROGRAM” on the remote control to enter PROGRAM
mode, ‘ “MEM” “P01 T 01” will show on the screen.
2. Press “ ” or “ ” to select your desired track and then press “PROGRAM” to confirm.
3. Repeat the step 1 and step 2 to continue to program.
Note: You can save a total of 20 MP3 tracks or 20 CD tracks. ‘FULL’ will show on the
screen once over 20 MP3 tracks or 20 CD tracks.
4. Press “ ” to play the saved tracks, press “ ” or “ ” to select a track in the sequence
saved.
5. Press “ ” twice to leave program mode. The entire program stored in memory is canceled.
BLUETOOTH
®
FUNCTION
1. Select the Bluetooth
®
mode.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth
®
tagged as
‘MCD5600’, then confirm connection.
3. Now you can transfer the music to MCD5600 and all operations can only be operated from
your mobile device.
4. To disconnect the Bluetooth
®
connection, press and hold “PLAY/PAUSE ”, or switch
the unit to other mode, or switch off the Bluetooth
®
function of your device.
AUX IN OPERATION
Select the PHONO/AUX mode. Insert the audio cable (not included) into the matching ‘AUX
IN’ socket of the unit.
Start the playback of the connected device and you can hear the sound in MCD5600.