PL585 / English Instruction Manual
5
PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA
Connecting
The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting
port.
Connecting the USB upside down or backwards could damage the audio system or the storage media.
Check to be sure the direction is correct before connection.
1. Turn the “FUNCTION” knob (5) to select USB.
2. Plug-in the USB plug with the face up & make sure it going into completely.
3. The system will start reading the storage media after connecting, and LCD display (8) will show the total
number of MP3 files and total number of folder being detected then will start playback automatically.
Remark: USB port does not support connection with USB extension cable and is not designed for
communication with computer directly
Pause / Play mode
To interrupt, press the “Play/Pause” button (10) once, the playing time will be freeze & flashing on the LCD
display (8). Press again to resume normal playback.
STOP MODE
If “ Stop ” button (2) is pressed during play or pause mode, system will go to stop mode
Skip/search mode (skip/search up /skip/search down )
1. During play or pause mode, if “Skip up ” button (1) is pressed. It will go to next track and display the track
no. and then charge to play mode. Press “Skip down” (1) to repeat a track
2. Press within 2 seconds “skip down ” button (1) again, unit will go to the previous track and change to play
mode.
3. If press and hold the “ Skip up /down button “ (1) during MP3 playback, the playing track will go fast
forward or backward until the button being released.
Folder up /down control (by remote handset)
1. Press “ FOLDER▼ / ▲“ button, to select the requested folder.
2. Press the “ Play/Pause ” button to start playback.
Remark:
- The system can detect and read the file under MP3 and format only though the USB port
- If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3
player may not be able to play via the USB socket. This is not a malfunction of the system.
ID3 (track/album title) function (by remote handset)
1. Press the “ ID3 “ button during playback of MP3 file, the song title is being displayed. Press the “ ID3 ” button
again to disable the function.
Play mode
Press “ PLAY MODE” button (11) before or during playback, a single track, single folder or all the tracks can be
played in difference mode as follow:-
(1) Repeat 1 (2) Repeat all track (3) Repeat one folder
(5) Off mode (4) Random
Play mode Indicator on LCD display
Repeat single track RPT-1
Repeat all tracks REP-ALL
Repeat single folder REP-ALB
Random mode RANDOM
Off mode OFF
To Next Page
Loading...
