SOUNDMASTER UR2170 - Automatic Memory Setup (AMS); Listen to Music; Listen Music from CD; How to play a CD|MP3 CD

UR2170 / English Instruction Manual
11
• How to set up station by AMS (Automatic Memory Setup)
1. Press and hold <AMS> for 2 seconds to active AMS mode.
2. In this mode, the radio will automatically scan the radio station and store the station
that had been scanned until scan up all the frequency or stored all the memory station,
it will exit automatically.
• How to Review stored station:
1. Press and hold <MEM> to enter select list of AMS store mode.
2. Press <Up> or <Down> to select station.
3. Press <Enter> to confirm select and tune to new frequency
• How to enable or disable stereo feature
If received a weak station that may cause background noise, user can be stereo feature
to improve sound quality.
1. Press <INFO> for 2 seconds to 'FM set menu' mode.
2. Press <UP> or <DOWN> to select 'Audio setting'.
3. Press <Enter> Confirm select and enter 'Audio setting' set mode.
4. Press <Up> or <DOWN> to select set.
5. Press <enter> Confirm and return to 'FM set menu' mode.
Review information of station
1. Press <info> to review information of station.
2. There are there kinds of choices, it is respectively:
 Station text
 Station Program type
 Station RSSI
Listen Music from CD
Press <Power>key to tune device on , press <Func> select work mode to CD or press
< “Open|Close” >key to open CD tray, Display should be show as below:
How to play a CD|MP3 CD
1. Press <Open> to open tray of CD and put CD media to tray, press <Open|Close>
key again to close door of CD tray, at the moment , device will catch data from CD
and “Reading, … “ for about 5-10 seconds, it’s will depends CD quality .
2. Once the CD read and confirm it’s workable format, device will play from beginning
of play list if not any key press.
3. When need to pause for the moment under playing, press “Play|Pause” once, press
once will play again.