SOUNDMASTER UR2170 - How to Listen FM Radio

UR2170 / English Instruction Manual
10
• How to using Auto Scan
a. Press and hold <AMS> for 2 seconds to active about function mode.
b. At the moment, the device will automatically scan the DAB station and store the
station that had been scanned until scan up all the frequency or stored all the
memory station, it will exit automatically.
• Review the information of station
a. Press <info> to review information of station.
b. There are Seven kinds of choices, it is respectively:
1. Station frequency and block number
2. Data rate
3. Station RSSI
4. Signal error Rate
5. DLS (Scrolling text)
6. Program type
7. Station name
How to Listen FM Radio
Press <Power>key to turn device on, press <Func> select work mode to FM, Display should be show as
below:
• How to search station
1. When the radio is ON, press <UP> once to change the receiving frequency up by 1 step
2. Press <DOWN> once to change the receiving frequency down by 1 step.
3. Press and hold <UP> to search the next radio station automatically by moving the
receiving frequency up.
4. Press and hold <DOWN> to search the next radio station automatically by moving the
receiving frequency down.
• How to store station into preset location
1. Press <MEM> once to select location of preset mode.
2. Press <Up> or <Down> to change location.
3. Press and hold < enter > to store value of station into The current location.
• Recall the presented station
1. Press <MEM> once to select location of preset.
2. Press <Up> or <Down> to change location.
3. Press <enter> to Confirm select and recall the frequency.