Soundstream AL.1 - Keyless Connector and System Reset; 3 Pin Keyless Connector; System Reset Procedure

10 pages

To Next Page

To Previous Page

3 PIN KEYLESS CONNECTOR

BLUENEGATIVE OUTPUT FOR UNLOCK

RED12+ OUTPUT FOR DOOR LOCK MODULE

NEGATIVE OUTPUT FOR LOCK

GREEN

System Reset will set all program menu’s to the default factory setting.

SYSTEM RESET

Cycle the Ignition Key - ON/OFF ON/OFF ON

(Leaving the key ON)

1 chirp confirms program mode entered followed by

3 chirps confirming that the system has reset.

1 -

2 -

3 -

Press and release the program switch (The siren will chirp)

**If the siren does not chirp repeat step 1-2.

Hold the program switch until the siren chirps 3 times.

SYSTEM PROGRAMMING - Menu 1

INSTALL MANUAL

SYSTEM WIRING

AL.1