Soundstream AL.1 User Manual

FCC ID NOTICE
This device complies with Part 15 of the FCC rules. Operation is s
ubject to the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including inte
rference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the part responsible for compliance void the user’s authority to operate
this device.
AL.1
AUTO SECURITY SYSTEM
INSTALLATION GUIDE

Soundstream AL.1 Specifications

General

Brand	Soundstream
Model	AL.1
Category	Car Alarm
Language	English

Summary

Installation Guide and FCC Notice

FCC ID Notice

This device complies with FCC rules and must accept interference.

System Wiring Overview

Wiring Connections Overview

Lists wire functions, colors, and gauges for system connections.

System Wiring Details

10 Pin Connector Wiring

Specifies wires for the 10-pin connector, including siren, trunk release, and inputs.

3 Pin Power Connector Wiring

Details wires for the 3-pin power connector: park light, ground, and power input.

System Wiring Descriptions

10 Pin Connector Description

Provides detailed descriptions of each pin function in the 10-pin connector.

3 Pin Power Connector Description

Details the function of each pin in the 3-pin power connector for power and grounding.

Keyless Connector and System Reset

3 Pin Keyless Connector

Details the 3-pin connector used for optional keyless entry features.

System Reset Procedure

Step-by-step instructions to reset all program menus to default factory settings.

Programming Mode Entry

Entering Program Mode

Guides users on how to enter the system's programming mode via ignition and switch.

Program Mode Charts

Program Mode 1 Chart

Details options and settings for Program Mode 1.

Program Mode 2 Chart

Details options and settings for Program Mode 2.

Transmitter Programming

Entering Remote Program Mode

Instructions to enter the mode for programming up to three transmitter codes.

Programming Remotes

Steps to program the 1st, 2nd, and subsequent remotes for normal or pad lock operation.

Shock Sensor Adjustments

Enter Shock Sensor Adjustment Mode

Procedure to enter the shock sensor adjustment mode using remote buttons.

Adjusting Sensor Sensitivity

Details on adjusting sensor sensitivity by pressing lock/unlock buttons.

Exit Sensor Adjustment Mode

Instructions to exit the shock sensor adjustment mode and confirm settings.

System Diagnostics

Alarm Status and Diagnostics

Interprets siren chirps and LED flashes to diagnose alarm triggers and system status.

Output Diagnostics

Lists LED flash codes indicating output overloads such as lock or unlock circuits.