4
INSTALLATION STEP 2
b
COHERENT
STERE@/MIXED-
MONO/BRIDGED MONO
The REFERENCE Class A amplifiers have the ability to operate in any one of
the following modes:
COhWefIf
sfWeOrM
with identical left and right stereo channels for
maximum fidelity. Best choice for satellite speakers. Use this mode unless
Mixed-Mono is necessary.
MiXed-MOfIO
in order to drive stereo and mono simultaneously; works well
for center channels. It can be used anytime you need a summed mono
channel. Somewhat sacrifices sonic accuracy as additional circuitry is
introduced to one channel. In Mixed-Mono, the left channel is inverted, see
diagram below or on the bottom of the amplifier,
Bridged
MOflO
for dedicated single channel operation; ideal for driving
subwoofers. It is also used when large amounts of power are necessary for
single speakers. In bridged mono, only the right channel input is active.
MIXED MONO
NOTE: If you
intend
to
drive a
FEFERENCE
the switch in
Mix&Mono
but follow the normal
13
To Next Page
Loading...
Need help?
General
