To Next Page
V
Vanessa Butler DDSJul 31, 2025
How to fix no sound on Soundstream Car Receiver?
- DDaniel BenjaminJul 31, 2025
If there is no sound from your Soundstream Car Receiver, first cancel the mute function. Then, adjust the volume to a suitable level.
How to fix no sound on Soundstream Car Receiver?
If there is no sound from your Soundstream Car Receiver, first cancel the mute function. Then, adjust the volume to a suitable level.
What to do if there is no picture on my Soundstream Car Receiver?
If you're not getting a picture on your Soundstream Car Receiver, open the monitor first. Then, choose the correct video input on your TV to receive the picture from the unit.
What to do if function buttons do not work on Soundstream Car Receiver?
If the function buttons on your Soundstream Car Receiver are not working, press the RESET button.
Why is the radio reception so poor on my Soundstream Car Receiver?
If you are experiencing poor radio reception with your Soundstream Car Receiver, ensure the antenna is fully extended and properly connected. If the antenna is broken, replace it. Also, check the antenna connection to ensure it is properly grounded.
What to do if the disc can not be inserted into Soundstream Car Receiver?
If your Soundstream Car Receiver will not allow you to insert a disc, push the disc while pressing the EJECT button. If a disc is already loaded, eject it. You can also try pressing the RESET button.
General| Channels | 4 |
|---|---|
| Bluetooth | Yes |
| AM/FM Radio | Yes |
| Touchscreen | Yes |
| SD Card Slot | Yes |
| Navigation | No |
| Remote Control | Yes |
| USB Port | Yes |
| Aux Input | Yes, Front |
| Preamp Voltage | 4 Volts |
| Display Type | TFT LCD |
| Compatible Audio Formats | MP3, WMA |
| Power Output | 50 Watts x 4 Channels |
Advice on safe driving, cleaning, and parking to prevent accidents and unit damage.
Warning about using fuses with higher current ratings than supplied, which can cause damage.
Details on installing the unit using the mounting sleeve into the dashboard.
Details on installing the unit using screw holes at the sides of the unit (ISO Mount).
How to operate power, source switching, volume, mute, loud, and EQ settings.
Procedure to calibrate the screen's viewing angle by pressing specific buttons.
How to configure system parameters like Radio Area, Video Type, Audio, and Clock settings.
A guide to common problems and their solutions, such as no sound, disc issues, and poor reception.
