Source Audio Collider Delay+Reverb - Hardware Options; Hardware Bypass Mode; Control Input Function

SA263 Collider Delay+Reverb Owner’s Manual
38
Hardware Options
Clicking the gear icon in the Collider Delay+Reverb’s Connections window opens the Hardware
Options menu (see the graphic below). Use the Hardware Options window to choose your pedal’s
universal hardware settings.
The Collider Delay+Reverb’s Hardware Options include the following:
• Hardware Bypass Mode: Selects between True or Buffered Bypass.
• MIDI Channel: Selects the pedal’s MIDI channel (1 through 16).
• Control Input: This dropdown menu assigns the control function of the external switch
connected to the CONTROL INPUT. There are three choices: Neuro Hub/Expression,
Increment Preset, Decrement Preset, and Tap Tempo.
• Preset Extension Mode: Adds an additional 4 user presets for a total of 8 presets accessible
without MIDI messages.
• Delay/Reverb Trails Mode: Checking this box allows your delay or reverb trail to decay
naturally upon bypassing the effect.