SA263 Collider Delay+Reverb Owner’s Manual
Full MIDI Implementation – Collider’s parameters can be accessed and controlled using MIDI
messages via its 5-pin DIN Input, a Neuro Hub connection, or USB port. Use MIDI messages to
engage/disengage the pedal, change presets, move parameters with a MIDI expression controller,
and more. Class compliant USB-MIDI allows the Collider to work as a plug-and-play device with
recording software running on Mac and Windows.
External Control – Easily configure the Collider to work with a variety of expression pedals and
footswitches for various external control options
Discover Knobs Position – Allows you to “discover” where the pedal’s knobs are set for a given
preset, via the Control LED flashing when you’ve reached the correct knob position on the dial.
To Next Page
Loading...
