SA260 Nemesis Delay User’s Guide 15
Time Knob Range: 40 milliseconds to 2.6 seconds
Mod and Rate: MOD controls the amount of time modulation (vibrato) and RATE controls the
modulation rate as well as the rate of the tremolo.
Intensity: Controls the depth of the tremolo.
SEQUENCED FILTERS (14)
This is a 4-tap delay with a fixed filter on each tap. The filters (a collection of resonant low-pass filters
and band-pass filters) are centered at different frequencies so the overall effect feels like a moving
filter controlled by a step sequencer. Since this delay engine contains 4 taps which are evenly spaced
over the primary delay, you should tap in the tap tempo rate at a quarter of the desired rate.
Time Knob Range: 10 milliseconds to 2.6 seconds
Mod and Rate: Control time (pitch) modulation depth and speed.
Intensity: Controls the amount of distortion in the wet delayed signal. Full counter-clockwise is
no distortion. Full clockwise is maximum distortion.
DUB (15)
This is a diffused high-pass filtered delay that feels right at home in a rasta dub tune.
Time Knob Range: 10 milliseconds to 2.6 seconds
Mod and Rate: Control time (pitch) modulation depth and speed
Intensity: Controls the amount of high pass filter applied to the repeats, making them thinner
over time, in a style typical of dub music.
CHORUS (16)
Repeats are sent through a stereo chorus effect for a warm modulation sound.
Time Knob Range: 50 milliseconds to 2.6 seconds
Mod and Rate: Controls the amount and speed of the chorus modulation.
Moderate Tremolo
Intense TremoloSubtle Tremolo
To Next Page
Loading...
