SA163 Reflex User’s Guide 11
The following figure shows an example where the Min is set to 20, the Max is set to 90, and the
Depth is set to -63 (the output is inverted):
Low Frequency Oscillators (LFOs)
There are five built-in low frequency oscillators (LFOs) which can be used to modulate the expression
output periodically with a certain wave shape. When an LFO is active, the position of the treadle
controls the frequency, or rate, of the LFO.
Sine LFO
The sine LFO follows the typical sine shape that is widely used in modulation effects such as chorus
and phaser.
Expression
Output
90
20
Treadle Position
Toe
Heel
To Next Page
Loading...
