Source Audio Reflex - Page 8

SA163 Reflex User’s Guide 8
Tapers
Two basic tapers are available by default: linear and logarithmic/audio.
Linear Taper
The linear taper has a linear relationship between the position of the treadle and the expression
output.
Audio Taper
The audio taper has a logarithmic relationship between the position of the treadle and the
expression output.
Taper Min Parameter
When a taper is active for a given expression output, the Min parameter controls the minimum value
which is output when the treadle is in the heel down position (except when the depth of the taper is
inverted). By default, the Min parameter is set to 0, meaning that the expression output ranges from
0 to 127. If the Min parameter is increased, then the range of the expression output is decreased.
Treadle Position
Expression
Output
Toe
Heel
Expression
Output
Treadle Position
Toe
Heel