MAINTENANCE
For long life of your machine and trouble free operation, regular program of maintenance is re-
quired.
The recommended phases of maintenance are for normal use and can be varied depending on the
different conditions.
Always disengage tractor PTO before starting maintenance.
Every 10 working hours
•
Check for loose screws that fix the knives;
•
Grease the PTO shaft components;
• Clean the end of PTO shaft with non toxic / non inflammable detergent;
• Be sure driveline shields are in place and in good condition;
• Using the grease nipples located on top of the rotor shaft hubs (one for each shaft) and ex-
actly under the plugs present on the covers, grease the bearings of the shafts it selves. To
carry out this operation take out the plugs from the covers and clean the grease nipples. Use
grease of lithium NLGI 2;
• Clean the machine.
Pag.24
To Next Page
Loading...