Pag.7
SAFETY INSTRUCTIONS
Before using the implement you must be sure to know the main safety precautions; in fact many
accidents are caused by not observing these rules.
Pre-operational and operational safety rules
Make sure that no person operates this machine unless they first, thoroughly read and
studied the operator instructions for this machine and understood all the safety precau-
tions.
Keep all guards, shields and safety decals in place and proper working order before oper-
ating this machine.
Operate only with a tractor equipped with an approved Roll Over Protective System
(ROPS) and always wear your seat-belt.
Operate only in daylight or good artificial light.
Only trained personnel can operate with the tractor and the implement.
Personal protection equipment, including safety shoes, safety glasses, hard hat and
gloves are recommended during the different operations. Do not allow long hair, loose
fitting clothing or jewellery to be around moving parts.
Do not leave the tractor seat until the engine is completely turned off, brakes locked
and ignition key removed.
Do not allow riders on the machine or tractor at any time. No safe place for any rider.
Before starting to operate, be sure that the tractor's PTO is set to match the PTO require-
ments of the implement. The speed is indicated in this manual and on the implement.
Do not use different driveline . Always use type and size supplied by the manufacturer.
Make sure driveline spring-activated locking pin operate freely and are seated firmly in
tractor PTO stub shaft groove.
To Next Page
Loading...