Pag.4
GENERAL INFORMATION
All implements with moving parts are potentially hazardous. The manufacturer has designed
the implement to be used with all the safety equipment properly attached. The purpose of this
manual is to assist you in safety maintaining and operating the implement.
These instructions have been compiled from our experience.
Through this experience and these instructions, you should be able to develop operating proce-
dures suitable to your particular situation.
Illustrations and data used in this manual may vary slightly in some details. Throughout this
manual references are made in left and right directions. These are determined by standing at the
rear of the equipment and facing the direction of forward travel.
Even if some illustrations in this manual show the machine
with safety shields removed for a better view, never operate in
these conditions.
BEFORE OPERATING THE IMPLEMENT, ALL SAFETY
SHIELDS OR DEVICES MUST BE MOUNTED
RIGHT
LEFT
To Next Page
Loading...