General information
Operating Instructions Soyer Bolzenschweißtechnik 5
1. General information
These operating instructions include important instructions and provisions for the
operation of the devices. Please keep the operating instructions at hand near the
devices.
In these operating instructions, the term “devices” refers to the stud welding
device and the stud welding gun.
Carefully read the operating instructions and any other documents contained in
the technical documentation. Pay particular attention to the safety instructions
which are intended to help you recognise any possible residual risks and prevent
hazards.
The drawings and illustrations in these operating instructions are for illustrative
purposes and may vary slightly from the actual equipment.
The manufacturer reserves the right to make technical changes.
1.1 Validity of the operating instructions
These operating instructions apply to the following devices:
1.2 Declarations of conformity
The devices are designed and constructed in accordance with the general
accepted codes of practice.
Stud welding device BMS-9 ACCU
Stud welding gun PS-9K ACCU
Please note that significant changes to the device will cause the
declaration of conformity to become void.
Furthermore, the manufacturer's warranty may be rendered invalid.
To Next Page
