13
（6-4-）4
() .
. ( - - ), ( - - )
3 Insert MC4Connector into the DC terminals of the Inverter Install
refer to the following pictures Picture6 4 4 Picture 6 4 5 。
（6-4-）5
▼Check the solar panels at no-load open
circuit voltage of the machine within the
allowable range! If there is overvoltage,
the device may be damaged!
Warning
6.5 Test Run
oint the connectors
Complete the joint of the connecters
Electrical Connection
To Next Page
Loading...
Need help?
General
