The temperature will rise by the working
so don’t put inverter with Flammable and explosive goods
stored in.
Don’t install the Inverter iin where have explosive dangerous.
,
Warning
▼
▼
▼
Installation
8
5.0
5 1 Securely Anchored.
a.
b.
Installed in a dry and ventilated place
Install where easy to maintain and reduce the length of the cable to reduce
consumption then enhancing power generation efficiency.
，
，
Installation
Before installation please read the installation instructions carefully
First should ensure the installation location is stable and safe The
size of the micro inverter as the picture 5 1 1,and then the user should mark the
mounting holes position on the wall according to the size of the micro
inverter Installation location should ensure stable and easy to observe the LED
lamp Last,the bottom and top of micro inverter should have enough space for
heat dissipation and maintenance Please see figure 5 1 4
,
, .
--
.
. -
. --
Sketch Map
（5-1-1）
110mm
260mm
190mm
To Next Page
Loading...
Need help?
General
