LCD
6
www spe pv com. -.
3 5 LCD.
c
Model:1200W
AC:180-260V 50Hz/
DC:85-130V
MPPT:65 100V-
Power: 888W
AC:220V 50Hz
Total Power
00888 0kW h. ·
System starting
AC Check ->
DC Check ->
10S Rev30 -- . .
Note The above number just for reference : .
1 Input the corresponding current and voltage to the Inverter
2 Starting the machine LCD will show the LOGO for 3 seconds
3 The LCD backlight will work by starting And it will shut down
after two minutes by energy saving device
. .
. .
. ,
- .
，
1 LCD shows the Model and data for 5 seconds Such as Max
Working Voltage Range of AC Voltage DC Input Voltage Range
MPPT Voltage Range etc
. ,
, , ,
,.
1 The Inverter has Self inspection mode for 10 seconds it will check
AC Voltage frequency DC Voltage It will work when all the data
are OK
2 Software Version is showed on LCD when the Self inspection
. - ,
, , .
.
. - .
1 LCD show when the inverter is grid tied
A Grid tied Power As the picture in left Power 888W it means
the current generation is 888W
B AC Voltage and Frequency As the picture in left
AC 220V 50Hz
C The cumulative output generation As the picture in left Total
Power 888KW H
2 The real time information is showed for 5 seconds then the
Model and Data for 3 seconds and followed By Recycling
. - :
. - ( , : ,
.)
. . ( :
: / .)
. （ :
: / .）
. - ,
, .
LOGO
To Next Page
Loading...
Need help?
General
