CONNECTING EXTERNAL DEVICES(Continued)
Connecting a VCR
Displaying a VCR image
You can use the S-Video terminal when connecting a VCR and other audio visual equipment (if there
is an S-VIDEO output on the VCR. If there isn't, use the VIDEO (AV) terminals).
Each time SOURCE is pressed, the input source toggles.
Refer to your VCR operation manual for the signal type.
To watch a VCR image, select "S-Video from the "INPUT SOURCE" menu using
SOURCE on the remote control unit or on the Display.
VCR
31
LR
AUDIO
S-VIDEO 1
NOTE
(Not Supplied)
(Not Supplied)
ENGLISH
To Next Page
Loading...