Drivers Installation SY-5EMM
76
2. The ALS120 Sound Chip Configuration Program screen will be
displayed. Use the Tab, Space, Enter, Down Arrow, and ESC
keys and/or the mouse to select and set options in menus, to
move between menus, and to make and set changes to values.
3. In the Sound Chip Configuration Program menu, the SB16
configuration screen showing the I/O port, DMA, and IRQ
settings will be displayed, and the default settings are: I/O Port:
220, DMA1: 1, DMA2:3 and IRQ: 5. Select and set any
changes or accept the defaults.
4. In the Sound Chip Configuration Program menu, select
“MPU401” to configure the external MIDI. The Enable/Disable
box can be selected by using mouse or [space] key. If the
external MIDI is enabled, the I/O port and IRQ settings will be
displayed and can be changed by mouse control or [down
arrow] key. The default settings are: I/O Port: 330 and IRQ: 9.
Select and set any changes or accept the defaults.
5. In the Sound Chip Configuration Program menu, select “CD-
ROM” to configure the CD-ROM. The Enable/Disable box can
be selected by using mouse or [space] key.
6. In the Sound Chip Configuration Program menu, select
“ADLIB” to configure the OPL3. The Enable/Disable box can
be selected by using mouse or [space] key.
7. In the Sound Chip Configuration Program menu, select “Game
Port” to configure the game port. The Enable/Disable box can
be selected by using mouse or [space] key.
8. In the Sound Chip Configuration Program menu, select “Set
Volume”. The Setting Volume screen will be displayed. Make
and set any changes or accept the existing settings and return
to the Main Menu.
To Next Page
Loading...
Need help?
General
