Introduction SY-5EMM
6
Chapter 2
HARDWARE SETUP
Congratulations on your purchase of SY-5EMM Super 7
TM
Mainboard. You are about to install and connect your new
mainboard.
Note: Do not unpack the mainboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 Preparations
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1. Pentium processor with CPU cooling fan.
2. DIMM memory module
3. Computer case and chassis with adequate power supply unit
4. Monitor
5. Keyboard
6. Pointing Device (PS/2 mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, Floppy drive…
9. External Peripherals: Printer, Plotter, and Modem (optional)
10. Internal Peripherals: Modem and LAN cards (optional)
Frequently Asked Questions:
l Do I need to install a sound card?
The answer is NO since, for your convenience, the SY-5EMM
mainboard already features built-in audio-stereo ports (Line-in,
Line-out, and Microphone).
l What kind of speaker can connect to "Line-out" port?
This motherboard requires a speaker with built-in amplifier to
generate proper output sound volume.
To Next Page
Loading...
