Hardware Setup SY-6BA+
8
2-3 INSTALLATION GUIDE
We will now begin the installation of the Motherboard. Please follow
the step-by-step procedure designed to lead you to a complete and
correct installation.
Warning: Turn off the power to the Motherboard, system
chassis, and peripheral devices before performing any
work on the Motherboard or system.
BEGIN THE INSTALLATION
Step 1. CPU Installation
Your SY-6BA+ motherboard comes with a CPU retention set kit. The
retention set is used to hold the processor attached to the Slot 1
CPU connector on the motherboard.
Follow these instructions to install your Slot 1 processor correctly.
Ø Retention Module
To Next Page
Loading...
