SOYO SY-6BA+ - Soyo Combo Setup

BIOS Setup Utility SY-6BA+
28
3-1 SOYO COMBO SETUP
This Motherboard does not use any hardware jumpers to set the
CPU frequency. Instead, CPU settings are software configurable
with the BIOS [SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on,
then press the <DEL> key during the system diagnostic checks to
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will display on screen. Then, select the [SOYO COMBO SETUP]
option from the main menu and press the <Enter> key.
The [SOYO COMBO SETUP] menu combines the main parameters
that you need to configure, all in one menu, for a quick setup in
BIOS.
ROM PCI/ISA BIOS
SOYO COMBO SETUP
AWARD SOFTWARE, INC.
CPU Frequency
CPU Host/PCI Clock
CPU Ratio
AGP Clock
: 350Mhz(100*3.5)
: 100/33MHz
: x 3.5
: Auto
CPU Warning Temperature
Current System Temp.
Current CPU Temperature
Current CPUFAN Speed
Current CHAFAN Speed
: Disabled
: 24
°
C/75
°
F
: 29
°
C/84
°
F
: 6553 RPM
: 6553 RPM
CPU L2 Cache ECC Checking : Enabled
Boot Sequence : A, C, SCSI
Quick Power On Self Test : Enabled
VID(V)
3.3(V)
+12(V)
-5(V)
: 2.78 V
: 3.31 V
: 11.84V
: -4.88V
VTT(V)
+5 (V)
-12 (V)
: 1.50V
: 4.97V
: -11.45V
CPUFAN Off In Suspend : Enabled
ESC
F1
F5
: Quit
: Help
: Old Values
↑ ↓ → ←
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
POWER ON Function
KB Power ON Password
Hot Key Power ON
Soft-Off by PWR-BTTN
Power-On by Ring/LAN
Power-On by Alarm
: BUTTON ONLY
: Enter
: Ctrl-F1
: Instant-Off
: Enabled
: Disabled
F6
F7
: Load BIOS Defaults
: Load Setup Defaults