SOYO SY-6BA+ User Manual

Hardware Setup SY-6BA+
10
3. Insert the CPU into the retention module. The CPU fits in the CPU slot
in only ONE way, do not try to force it in.
4. After completely inserting the CPU, push the two locks on top of the
CPU outward. Now your CPU is ready for use.
To remove the CPU, press the two notches on top of the CPU
inward. Now press the two slides on the retention module down
and remove the CPU.

SOYO SY-6BA+ Specifications

General

Brand	SOYO
Model	SY-6BA+
Category	Motherboard
Language	English