BIOS Setup Utility SY-6BA+
38
3-3.4 Typematic Settings
Typematic
Settings
Setting Description Note
Disabled Default
Typematic
Rate Setting
Enabled Enables to adjust the
keystroke repeat rate.
The following [Typematic Rate] and [Typematic Delay] fields are
active only if [Typematic Rate Setting] is set to [Enabled]
Typematic Rate
6 (Char/sec)
8 (Char/sec)
10 (Char/sec)
12 (Char/sec)
15 (Char/sec)
20 (Char/sec)
24 (Char/sec)
30 (Char/sec)
Choose the rate at which
a character is repeated
when holding down a
key.
Default
Typematic Delay
250 (msec)
500 (msec)
750 (msec)
1000 (msec)
Choose how long after
you press a key down the
character begins
repeating.
Default
3-3.5 Security Option
Use this feature to prevent unauthorized system boot-up or use of
BIOS Setup. The following table describes the security settings.
Setting Description
System Each time the system is booted, the
password prompt appears.
Security Option
Setup If a password is set, the password
prompt only appears when you attempt
to enter the BIOS Setup program.
To Next Page
Loading...
