SY-P4VGM V1.0 Quick Start Guide
12
Installation
On-board Speaker connection
When using 2-channel speaker, connect the speaker cable to Line-out.
If you’re using 4 channel speaker, connect the front L/R speakers to Line-out and rear
L/R speakers to Line-in. Make sure that the audio software is set for 4 channel speaker
system.
If you are using 6 channel speaker, connect the front L/R speakers to Line-out and the
rear L/R speakers to Line-in. Connect the Center/Bass to Mic-in.
Line-i
To Next Page
Loading...
