SOYO™
2
1. Please read the users guide before proceeding with your installations.
Serious damage may occur if the procedure is not followed properly.
2. Please make sure that your memory modules are inserted correctly. They can
go in only one way, and should fit completely in the socket without sticking
out.
3. If you have a Pentium 4 motherboard, you need to use an ATX12V power
supply (power supply for Pentium 4 system) is required for the system to
operate normally. (preferably 350 watts for minimal loading or 400 watts for
fully loaded system)
4. If you have any problem getting your system to work, please follow the
troubleshooting tips in your user manual.
5. On some mainboards, the actual chipset cooler may differ from the chipset
cooler as shown on the picture or on the box. However, the chipset fan on the
mainboard is of the same quality and will work just as well as the one shown
in the picture. (The chipset cooler is as sufficient as the chipset fan based on
different design.)
6. For immediate Technical questions, please visit SOYO tech support link at
http://www.soyousa.com/support
and http://www.soyousa.com/kb.
To Next Page
Loading...
Need help?
General
