SP tools SP61150 - System Status; Reading Codes

11
OBDII Diagnostics
When more than one vehicle control module is detected by the scan tool, you will be
prompted to select the module where the data may be retrieved. The most often to be
selected are the Powertrain Control Module [PCM] and Transmission Control Module [TCM].
SYSTEM STATUS
1. Use SCROLL button to select System Status
from Diagnostic Menu and press
ENTER/EXIT button.
2. View System Status contents on screen.
3. Press ENTER/EXIT button to return to previous menu.
READING CODES
1. Use SCROLL button to select Read Codes
from Diagnostic Menu and press
ENTER/EXIT button.
==================
1/6
1) System Status
2) Read codes
3) Erase Codes
4) I/M Readiness
Diagnostic Menu
==================
2/6
1) System Status
2) Read codes
3) Erase Codes
4) I/M Readiness
Diagnostic Menu
==================
1/6
1) Code Found 3
2) Monitors N/A 4
3) Monitors OK 2
4) Monitor INC 2
System Status