SP tools SP61150 - Viewing Vehicle Information

15
3. If the vehicle supports both types of tests, then
both types are shown on the screen for selection.
4. Use SCROLL button to view the status of the MIL light (ON or OFF) and the following
monitors:
• Misfire monitor -- Misfire monitor
• Fuel System Mon -- Fuel System Monitor
• Comp. Component -- Comprehensive
Components Monitor
• EGR -- EGR System Monitor
• Oxygen Sens Mon -- O2 Sensors Monitor
• Catalyst Mon -- Catalyst Monitor
• EVAP System Mon -- Evaporative System
Monitor
• Oxygen Sens htr --O2 Sensor Heater Monitor
• Sec Air System -- Secondary Air Monitor
• Htd Catalyst -- Heated Catalyst Monitor
• A/C Refrig Mon -- A/C system Monitor
5) If the vehicle supports readiness test of
"This Drive Cycle", a screen of the following
will be displayed:
6) Press ENTER/EXIT button to return to previous
menu. Viewing Vehicle information
VIEWING VEHICLE INFORMATION
The Vehicle Info. function enables retrieval of:
• Vehicle Identification No. (VIN) on 2002 & newer vehicles that support Mode 9
• Calibration ID Nos. (CINs)
• Calibration Verification Nos. (CVNs)
===============
Since DTCs Cleared
This Drive Cycle
Exit
I/M Readiness
==============
1/3
MIL Status OFF
Misfire Monitor OK
Fuel System Mon. OK
Comp. Components OK
Since DTCs Cleared
=============
1/3
MIL Status ON
Misfire Monitor OK
Fuel System Mon. OK
Comp. Components OK
This Drive Cycle