SP tools SP61150 - Navigation Characters; Technical Specifications; General Information

4
NAVIGATION CHARACTERS
The numbers "x/x" in the upper righthand
corner of the screen indicate the total number
of screens covered in each menu and the
sequence of the displayed data.
>
Indicates current selection
Pd
Pending Diagnostic Trouble Code when viewing DTCs
$
Identifies the control module number from which the data is retrieved
OK
Indicates that a particular monitor being checked has completed its
diagnostic testing
INC
Indicates that a particular monitor being checked has not completed its
diagnostic testing
N/A
The monitor is not supported on that vehicle
TECHNICAL SPECIFICATIONS
• Display: LCD, backlit
• Operating Temperature: 0 to 50°C (32 to 122 F°)
• Storage Temperature: -20 to 70°C (-4 to 158 F°)
• Power provided via OBDII cable
• Dimensions: Length 115mm, Width 72mm, Height 20mm
• Weight: 200g
GENERAL INFORMATION
The vehicle’s On-Board Diagnostics Generation Two (OBDII) system is designed to monitor key
engine functions by performing either continuous or periodic tests of specific components and
conditions. When a problem is detected, a warning lamp is illuminated on the vehicle
instrument panel to alert the driver, typically "Check Engine" or "Service Engine Soon". The
system also stores important information about any detected malfunction. Using a code reader
to access this information allows a qualified technician to accurately find and fix the problem.
==================
1/6
1) System Status
2) Read codes
3) Erase Codes
4) I/M Readiness
Diagnostic Menu